Plenty of Clark County homeowners string lights through their trees in December, and hanging Christmas lights in trees is easy to do badly. A tight wrap, a plastic zip tie, or lights left up until summer can hurt a branch for years. A few habits keep the tree healthy and the lights on.
Hanging Christmas Lights in Trees Without Damaging Bark
The Morton Arboretum, a tree research and education organization, gives this advice on lighting trees and shrubs.
- Tie loosely, with soft ties. Strips of dark fabric work. Do not use plastic cable ties or wire twist ties, and do not nick or cut the bark. Give the branch plenty of wiggle room.
- Match the lights to the tree. On a dense, low evergreen you can drape the whole plant. On an open-form tree, hang lights along only the main branches.
- Pick a tree you can finish. Choose a plant of manageable size that you can decorate fully, rather than lighting part of a large tree.
- Use separate strings. Hang one for each area so you can take each down without pulling on branches.
- Protect the buds and twigs. Avoid damaging flower and leaf buds, and do not break twigs or branches while you work.
Hanging Christmas Lights in Trees Safely
The same source covers the practical side. Hang lights on a mild day, because cold weather makes branches brittle and more likely to snap. Choose LED lights, make sure lights, cords, and timers are UL-listed and rated for outdoor use, and do not overload the outdoor circuit.
Work with a partner who can steady the ladder and hand you things, so you are not overreaching. Keep ladders and light strings well away from any power line running near the tree. If a branch you need to reach is above ladder height, leave it unlit.
Check the Tree Before the Lights Go Up
Lights make a tree something people stand under, so look it over first. Dead limbs, cracks, and hanging branches are a bad fit with a ladder and an extension cord. Our post on how to spot a hazardous tree lists what to look for.
A limb that is dead or hangs over a roof is a pruning job, and it is better done before December than after. Our post on branches over a roof covers how that work is planned. Priority Tree Service handles tree trimming and pruning in Salmon Creek, WA, Camas, WA, Battle Ground, WA, Ridgefield, WA, and Washougal, WA, as well as Vancouver, WA.
Lights on a hedge follow the same rules. If an arborvitae or laurel hedge has dead patches or crossing branches, sort those out first. Our hedge and shrub trimming covers the shaping.
When to Take Christmas Lights Out of a Tree
The Morton Arboretum takes its lights down immediately after the holidays each year, so the trees are clear before spring growth begins in March. It also warns that wires left on too long can cut into the bark as the branch thickens, which damages the tissue that carries water and nutrients and can kill a branch or the tree.
Its practical tip is worth copying: put the removal date on the calendar when you hang the lights, so they do not stay up into January.
Questions About Christmas Lights and Trees
Can Lights Hurt a Tree?
Yes, if they are tied tightly, fastened with wire or plastic ties, or left on as the branch grows. The Morton Arboretum warns that wires left too long can cut into the bark and damage the tissue that moves water and nutrients.
Should I Wrap Lights Around the Trunk?
The Morton Arboretum's advice for an open-form tree is to hang lights along only the main branches and to tie loosely so the branch has room. Whatever you do, keep it loose and use soft ties.
What If a Branch Is Too High to Reach Safely?
Leave it dark. If the branch is dead, cracked, or over the roof, it needs pruning rather than decoration, and a climber with the right gear is the safe way to do it. When the whole tree worries you, our arborist reports give you a written opinion.
If a tree in your yard needs work before the holidays, contact Priority Tree Service for a free estimate in Vancouver, WA or anywhere in Clark County.